SKMEI 1761 Dual Time Watch Manual

◆SKMEI 1761 Watch Instruction

SKMEI 1761 Operation Manual

(SKMEI 1761 Dual Time Watch Button)

A. Features

  • 6 Digits LCD Display, Display Hour, Minute, Second, Month, Day and week.
  • Daily Alarm and Chime hourly.
  • 12 / 24H format selectable, Auto Calendar
  • 1/100 second Chronograph
  • Dual time.
  • LED backlight

B. Operational Manual

How to change mode of dual time watch SKMEI 1761

At any state, press A key LED backlight for 3s.

Real Time Mode

  • Press and hold C key for 2s to time setting mode. "Second" flashing, press B key to zero; Press C to select item as following sequence: Hour → Minute → 12H/24H. Press B key to adjust the flashing
  • Press B key while the seconds are in the range of 30 to 59 resets them to 00 and adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.
  • If there is no key operation for 60s, Setting Mode will be exit and returned to Real Time Display Mode.

Date Mode

  • Press and hold C key for 2s to date setting mode. "Month" flashing. Press C key to select item as following sequence: “Month”, “Day”, “Week” Press B key to adjust the flashing.
  • If there is no key operation for 60 second, Setting Mode will be exit and returned to Date Display Mode.

Daily Alarm Mode

  • Press and hold C key for 2s to alarm setting mode, "Hour" flashing. Press C key to select item as following sequence: “Minute ( hour digit )”, “Minute ( Minute digit )”, “ALARM/CHIME” switch.
  • Press B key to adjust the flashing.
  • When switching “ALRM/CHIME” , press B key by sequence as follows:

How to set alarm on dual time watch SKMEI 1761

  • There will be 20s alert when alarm time is over.
  • If there is no key operation for 60s, Setting Mode will be exit and returned to Alarm Display Mode.

Dual Time Mode

  • Press and hold C key for 2s to dual time setting mode, "Hour" flashing, Press C key to select item as following sequence: "Minute", “12H/24”.
  • Press B key to adjust the flashing.
  • If there is no key operation for 60s, Setting Mode will be exit and returned to Dual Time Display Mode.

Chronograph Mode

  • Press C key to Start/Stop running;
  • When stop , press C key for 2s zero.

RELATED ARTICLES

Leave a comment

Your email address will not be published. Required fields are marked *

Please note, comments must be approved before they are published