SKMEI 1967 Operation Manual

◆SKMEI 1967 Watch Instruction

SKMEI 1967 Operation Manual

A. Features of SKMEI 1967: 

  • 8 Digits LCD Display, Display Hour, Minute, Second, Day, Month, Week
  • Dual time function
  • 2 alarm clock , Chime hourly
  • Countdown function
  • 12/24H
  • 1/100 second stopwatch and split time
  • EL backlight

B. SKMEI 1967 Operation Manual:

 SKMEI 1967 Operation Manual

  • In normal mode,press B key to choose the mode. In any mode,press A key, the EL light will be on for 3 seconds.


1.Time Mode

  • In time mode, press D key to display the current date.
  • Time and date setting: In time mode, press C key, “second” flashes, then press B key to select the item as below:  
    SKMEI 1967 Operation Manual
  • When the item is flashing, press D key to adjust it.
  • Press C key to exit the setting, back to normal mode.

2. Stopwatch Mode

  • The display range of the stopwatch is 23 hours, 59 minutes, 59.99 seconds.
  • The stopwatch continues to run, until you stop it, and restarting from zero after it reaches its limit.
  • The stopwatch will run continuously in other mode.
  • Stopwatch operation:

 SKMEI 1967 Operation Manual

SKMEI 1967 Operation Manual

3.Alarm Mode

  • Alarm and Chime hourly on/off:: In alarm mode, press D key to turn on/off the alarm (ALM) and the chime hourly (SIG).
  • Alarm setting: In alarm mode, press C key, “hour” flashes, press B key to select “minute” and “AL1/AL2” in turn, press D key to adjust the item, press C key exit the setting, back to normal mode.
  • Alarm operation: the ringing will stop after 15 seconds or press any key to stop it.

4.Countdown Mode

  • The display range of the countdown watch is 23 hours, 59 minutes, 59 seconds.
  • Countdown time setting: In countdown mode, press C key, “hour” flashes, press B key to select the “minute” and “second” in turn, press D key to adjust the item, press C key exit the setting, back to normal mode.
  • In countdown mode, press D key to start/stop the countdown.
  • 1 beep per second for 10 seconds before the countdown ends, and 3 beeps per second for 10 seconds at the end of the countdown.

5.Dual Time Mode

  • Display the time in another time zone.
  • Minutes and seconds of dual time mode are synchronized with time mode.
  • Dual time setting:
    1. In dual time mode, press C key, “hour” flashes, enter the setting.
    2. Only “hour” can be set in dual time mode .
    3. When the hour flashes, press D key to adjust it.
    4. Press C key to exit the setting, back to normal mode.

 

RELATED ARTICLES

Leave a comment

Your email address will not be published. Required fields are marked *

Please note, comments must be approved before they are published