SKMEI 1202 Watch Manual

◆SKMEI 1202 Watch Instruction

SKMEI 1202 dual movements watch operation interface

(SKMEI 1202 dual movements watch operation interface)

A. Features

  • 8 Digits LCD Display, Display Hour, Minute, Second, Month, Day and Week
  • 2 Alarm and Chime hourly
  • Dual Time
  • Timer
  • 12 / 24H format selectable
  • 1/100 second Chronograph with split functions
  • EL backlight

B. Operational Manual

How to change mode of SKMEI 1202

1.Real Time

  • Use the Real Time Mode to set and view the current time and date.
  • In the Real Time Mode. Press D key to view the current date, Release D key will return the Real Time Mode
  • To set the time and date:
    • a). In the Real Time Mode. Press C key until the “Seconds” start to flash, which indicates the setting screen.
    • b). Press B key to move the flashing in the sequence shown below to select other settings shown.

How to set time of SKMEI 1202

    • c). When the setting you want to change is flashing, press D key to change it as described below.
 Change this setting Perform this button operation
Seconds Press D key to reset to 00.
Minutes, Hour, Week, Month, Day Press D key to increase the setting
12/24Hour Press D key to change the 12-hour format or 24-hour format

 

    • d). The day of the week is automatically displayed in accordance with the date (year, month, and day) settings.

2.Chronograph

  • The display range of the Chronograph is23hour,59 minutes, 59.99seconds..
  • The stopwatch will be count to max. values and restart from zero until you stop it.

To measure times with the stopwatch

measure times with the stopwatch of SKMEI 1202

3.Daily Alarm

  • Alarm Operation: The alarm tone sounds at the preset time for about 15 seconds. Pressing any button stops the alarm tone operation.
  • Turn On / Off Alarm and Chime
  • Press D key to turn on/off Alarm ( “ ” ) or Chime (“ ”).
  • Alarm setting :In the Alarm Mode, press C key until the Hour setting of the alarm time starts to flash, Press B key to select "Hour "、"Minute "or ”alarm1/alarm2” setting, Press D key to adjust the flashing item, Press C key to confirm.

4.Countdown Timer

  • The display range of the timer is 23hr 59min,59sec.
  • Timer alarm sounds for about 10 seconds when counting down to 0:00:00.
  • Timer Time setting
    Press and hold C key f to time setting state and "Hour" flashing , Press B key to select "Hour" or "Minute" setting ,Press D key to adjust the flashing item, Press C key to complete setting.
  • Timer operation
    Press D key to Start/Stop counting .

5.Dual Time

  • Dual Time setting
    In the Dual Time mode ,Press and hold C key to select "hour" setting, Press D key to adjust the flashing item, Press C key again to finish setting ,and return to Dual Time displaying mode .

C. Specifications

RELATED ARTICLES

Leave a comment

Your email address will not be published. Required fields are marked *

Please note, comments must be approved before they are published