◆SKMEI 10Y Watch Instruction
（SKMEI 10Y watch button）
A. Features
- 6 Digits LCD Display，Display Hour ,Minute ,Second ,Month ,Day and Week
- Daily Alarm and Chime hourly
- 12 / 24H format selectable
- 1/100 second Chronograph
- Dual time .
- EL backlight
- 10 years Battery
B. Operational Manual
1.At any state ,press A or D key,EL backlight will light up.
2.Real Time
- Press C key for 2 seconds to enter into the time setting mode. "Second " flashing when loading , press B key to zero ; Press C key to select the blinking digit according to the following sequence:Hour Minute 12H/24H . Press B key to adjust the flashing item.
- While the seconds are in the range of 30 to 59 resets them to 00 and adds 1 to the minutes . In the range of 00 to 29,the minutes are unchanged.
- Press B key to adjust Time and Hold B key to adjust quickly.
- If there is no key operation for 60 seconds, Setting Mode will be exit and returned to Real Time Display Mode.
3.Date Mode
- Press C key for 2 seconds to enter into the date setting mode "Month" flashing when loading .Press C key to select item as following sequence: Day and Week .Press B key to adjust the flashing item.
- Press B key to adjust Date and Hold B key to adjust quickly.
- If there is no key operation for 60 seconds, Setting Mode will be exit and returned to Date Display Mode.
4.Daily Alarm
- Press C key for 2 seconds to enter into the alarm setting mode, "Hour " flashing .Press C key to select item as following sequence:“ Minute (ten's digit) ”,“ Minute (unit's digit) ”,“ ALM/SIG(Alarm/Chime) ”switch .
- Press B key to adjust the flashing item.
- When setting “ ALM/SIG ” switch , gradation as follows :
- There will be 20s alert when alarm time is over.
- Press B key to adjust Alarm and Hold B key to adjust quickly.
- If there is no key operation for 60 seconds, Setting Mode will be exit and returned to Alarm Display Mode.
5.Dual time
- Press C key for 2 seconds to enter into the Dual time setting mode," Hour " flashing when loading , Press C key to select item as following sequence :Minute 12H/24H
- Press B key to adjust time and Hold B key to adjust quickly.
- If there is no key operation for 60 seconds, Setting Mode will be exit and returned to Dual Time Display Mode.
6.Chronograph
- Press C key to Start/Stop running ; When stop , press C key for 2 seconds to return to zero.